How to connect hp officejet pro 8600 wireless to mac?
- jacobaiden93
- Dec 29, 2017
- 2 min read
Connecting your HP Officejet pro 8600 Printer Wireless Printer
Pre-requisites
A temporary USB connection is required from printer to computer
Follow the instructions to connect and configure the printer’s wireless connection.
Connect and disconnect the USB cable when prompted by the software.
HP Oj pro 8600 Printer Setup of Wireless
Follow the on-screen instructions
In Connection type Wizard select USB as the preferred connection type.
Then select “Yes, send my wireless settings to the printer (recommended)”
The software would automatically discover your wireless setting and your printer should be ready.
Note: If this is your first printer installation, the software might be unable to find the printer network. Browse through the instructions to create a wireless connection to the printer
Pre-requisites
Ensure that your printer has a touch display
Ensure that you know your network name and your security password (WEP, WPA, or WPA2).
Set-up Wizard
Run from the Printer’s control panel
On the Printer’s control panel, navigate to the Network menu or touch the wireless icon and then go to Settings
Select the HP officejet pro 8600 Wireless Setup wizard
Follow the on-screen instructions till the Connection Option window displays
In Connection type Wizard select Wireless or Ethernet as the preferred connection type.
Then select “Yes, send my wireless settings to the printer (recommended)”
Note: Internet might get disconnected temporarily during the above process
Follow the on-screen instruction to complete the setup
HP Officejet pro 8600 Printer Wi-Fi Protected Setup
WPS has two modes to connect devices together over a wireless connection. One is called “pushbutton” and the other is called “PIN”. This setup details the pushbutton mode
Pre-requisites
Ensure that your printer and wireless router supports WPS pushbutton mode
Wireless router must have a physical WPS pushbutton available
Your network must use WPA or WPA2 security
Connecting your wireless printer to your wireless router using WPS Pushbutton method
Enable the WPS push button mode on your printer.
Note: Kindly check printer manual to locate this function as it may differ from model to model.
Press the WPS button on the Router
Note: This has to be done within 2 minutes, once the WPS option is enabled on the printer.
Press the Setup button and choose the Network menu option on the printer’s Control Panel.
Choose your Wireless Network’s name from the list or add Network’s name manually.
Enter your password.
Note: Password is Case-sensitive.
Your printer should be ready by now, if not find the issue by printing the Wireless network report.
Click here For HP Oj Pro 8600 Printer Installation
Komentarai